Talius Habitat Screen
TM
Installation Guide
Version 2018.1
,
11
©TALIUS
SECTION SEVEN: LIMIT SETTING
This section shows the limit switch adjustment of motorized Habitat Screens. If your unit is manually operated
proceed to Section 8
7.1a) Somfy RTS Motors:
When you receive your Habitat Screen with a Somfy RTS motor the unit will come
with a pre-program transmitter in user mode. To adjust the limits follow the simple steps below. If you have a
multi-channel transmitter, select the channel corresponding to the unit that you are adjusting and follow these
steps. Which unit corresponds to which channel is chosen at the time of ordering. If you have more than one
unit on a single channel, power must be disconnected to additional units so that only the unit being adjusted has
power. After isolating a single unit, preform the limit adjustment steps below and repeat for each unit.
Step One: Adjusting the Upper Limit
-
Move the motor to its current upper limit position and let it stop
-
Press the
UP
and
DOWN
buttons simultaneously on the transmitter until the motor jogs, then release
-
Adjust to a new upper limit position
-
Press the
STOP
button until the motor jogs, then release
-
Check that the limit is in the desired position
Step Two: Adjusting the Lower Limit
-
Move the motor to its current lower limit position and let it stop
-
Press the
UP
and
Down
buttons simultaneously on the transmitter until the motor jogs, then release
-
Adjust to a new lower limit position
-
Press the
STOP
button until the motor jogs, then release
-
Check that the limit is in the desired position
