TALEX Spółka z ograniczoną odpowiedzialnością
Spółka komandytowa
ul. Dworcowa 9c
77-141 Borzytuchom
tel. (59) 821 13 40
e-mail.
Page
36
of
76
11. After season maintance
It covers all the activities listed in point: service after work. In addition, the machine should be
stored under a roof on a flat and firm surface. Pay attention to the tightness of the paintwork. In case
of loss must be cleaned and fill by applying a fresh coat of protective paint.
12. Disassembly, scrapping and environment protection
Worn or damaged parts obtained during repair (scrapping) must be stored in a separate location with
limited access of people and animals. Worn parts must be delivered to the scrap yards. Worn plastic
parts must be sent to a storage point (disposal) of chemical waste.
At the time of refilling or change of oil do not allow to spill it. Used oils should be stored in sealed
containers and periodically provided to the points that purchase them (disposal).
SPARE PARTS ORDERING:
Protect your hands (body) against injury and harmful effects of grease, oil.
Wear protective gloves and tools in good condition.
Machine parts, which during disassembly can move or rotate must be
adequately protected.
Abandoned parts or machine elements, spilled oil may result in accidents
and cause environmental pollution and violate applicable laws.
