TALEX Spółka z ograniczoną odpowiedzialnością
Spółka komandytowa
ul. Dworcowa 9c
77-141 Borzytuchom
tel. (59) 821 13 40
e-mail.
Page
8
of
59
5. Operator’s Health and Safety
This hay rake can be operated only by a qualified adult person, familiarized with its operating
principals and the content of the operating manual. The machine should be always handled
with utmost care.
5.1 Operator’s safety – general rules and recommendations
The Basic Health and Safety rules should be used in addition to the recommendations
included in this operating manual. Always comply with warning symbols on the machine.
The operator must have the sufficient qualifications to drive a vehicle to which the hay
rake is attached, in compliance with the manufacturer recommendations or current
legislation.
Be vigilant for places on the machine posing injury risk (sharp or pointed edges of the
machine, etc.). Exercise due caution near critical places, especially whilst performing any
kind of task requiring being close to the machine e.g. service, maintenance, making
manual adjustments etc. Protective outfit should always be worn including protective
clothing, gloves, safety boots and protective googles.
Read operator’s manual prior to use of this implement in order to familiarize yourself with its
working principals, risk management and recommendations regards operation and adjustment.
Do not use the hay rake with any missing factory-provided guard or cover limiting access
to hazard zones. Keep all safety guards and covers in working condition and check
regularly for their completeness.
Due to the residual risk involved, it is imperative that all the rules and recommendations
featured in this operating manual as well as common sense are followed at all times.
Reasonable conduct is advised.
Under no circumstances the machine should be operated by persons being under the
influence of alcohol or of any other intoxicating agent.
This machine should be only operated by the driver of the tractor (no passengers
allowed). No one should remain in the vicinity of this machine whilst working.
Do not use this implement against its intended purpose. Other than intended by the
manufacturer use will be considered as misuse and will void the warranty as well as will
exempt the manufacturer from liability for damage caused as result of such conduct.
In case of any doubt arising regards this machine or any piece of information included in
this document, please ask the manufacturer or your dealer for detailed explanation of the
issue.
Misuse, reckless behaviour around the machine and ignoring of the warnings included in
this operating manual can pose unnecessary threat to life, health.
It is recommended to check the technical condition of the machine every time before
work commencement. Pay special attention to the condition of headstock, linkage pins,
