Talex LIGHT FLAIL MOWER ECO 100, Руководство пользователя

Страница: 12 / 46

TALEX Sp. z o.o.
ul. Dworcowa 9c
77-141 Borzytuchom
tel.: +48 59 821 13 40
e-mail: biuro@talex-sj.pl
www.talex-sj.pl
12
Transport
 Before the mower linked to the tractor is set to the transport position, make sure that the PTO shaft is
turned off and all rotating elements are at rest.

Be especially careful when traveling with the attached machine on public roads and comply with
applicable road law. Moreover, for the duration of transport, a portable light and warning device and a
triangular sign for slow-moving vehicles should be installed on the machine.

Adjust your speed on roads to current road conditions and use common sense.

When cornering, be aware that the machine sticks out to the rear and sideways..
Working parts of the machine 3.4.

Before using the machine, pay attention to the condition of the cutting elements.

Worn and damaged cutting elements as well as their fasteners must be replaced immediately with
original spare parts.
Machines linked with three point hitch 3.5.

Before linking or removing the mower from the tractor's three-point linkage, set the hydraulic lift lever in
a position in which unintentional lifting or lowering of the machine is excluded.

Hitch categories of the tractor and the machine must comply.

In the transport position, always pay attention to the lateral stability of the tractor-mower connection.

During transport with the machine raised, the hydraulic lift control lever must always be secured against
lowering.
Machine unlinked from the tractor 3.6.
Park the machine on a stable and level surface, in a place protected from weather conditions and
unauthorized persons.
Work with the PTO shaft 3.7.

Use only PTO shafts supplied by the machine manufacturer or with similar parameters.
 All mounted PTO shaft covers must be operational. Replace damaged shaft covers immediately!
 Install and remove the PTO shaft only with the PTO shaft disengaged, the engine switched off and the
ignition key removed!

Observe the prescribed overlapping of the PTO shaft halves in the working and transport positions!

Secure the shaft cover with a chain to prevent it from turning with the shaft!

Before engaging the PTO shaft, make sure that the direction of rotation and rotational speed of the PTO
shaft correspond to the rotation of the PTO shaft.

Before engaging the PTO shaft, make sure that no one is within a dangerous distance of the machine.

Turn off the PTO shaft when it is not needed.