TALEX Spółka z ograniczoną odpowiedzialnością Sp. K.
ul. Dworcowa 9C
77-141 Borzytuchom
tel. (59) 821 13 26
by email.
The Instruction Manual
LEO 320 PROFESSIONAL shredder
Page
21
of
37
The shredding tools must be replaced after discovering defects, noticeable signs of
wear, blunting of the cutting edges, missing blades or hammers, or excessive play of
the mounted tools.
Table No. 2
MAXIMUM
PLAY OF THE SHREDDING TOOLS
Play
nominal
[mm]
permissible
[mm]
Blade
Ham
mer
Blad
e
Ham
mer
Axial
transverse
0.2
0.3
0.5
0.6
Axial
longitudina
l
0.1
0.2
0.4
0.6
The shredding tools must be replaced in compliance with the specific safety rules.
1. Use only the original and functional parts for the cutting units
2. The replacement must each time include the full set of tools. You must remember
about the uniform distribution of the rotating masses, to ensure the uniform wear
of the tools.
3. The bolt connections need to be replaced with new ones each time the tools are
replaced, paying attention to the durability 8.8 of the bolt and the self-locking nut.
4. When tightening the bolt connection, pay attention to the free (without excessive
play) rotation of the tool in relation to the bolt axis.
6.4
Maintenance after work
Each time your work has been completed, clean the machine and position it on a flat and hard
ground. Carry out an inspection of connections between the parts and units. Damaged and
worn out parts replace with new ones. Check all the bolt connections and tighten the loose
ones, according to the table on tightening torque values for bolts and nuts.
All safety signs on the machine and the triangular plate distinguishing slow vehicles should
be kept clean.
Table No. 3
TIGHTENING TORQUE VALUES FOR BOLTS AND NUTS
Durability
6.8
8.8
10.9
12.9
Metric thread
Tightening torque [Nm]
M5
4.5
5.9
8.7
10
M6
7.6
10
15
18
M8
18
25
36
43
