TALEX Spółka z ograniczoną odpowiedzialnością Sp. K.
ul. Dworcowa 9C
77-141 Borzytuchom
tel. (59) 821 13 26
by email.
The Instruction Manual
LEO 320 PROFESSIONAL shredder
Page
23
of
37
Fig. 6. Lubrication diagram
All points marked on Fig. 6, equipped with ball grease fittings, should be filled with solid grease
ŁT43 by means of a lubricator. Lubricate the jointed telescopic shaft after removing it from the
machine. Lubricate the telescopic part of the shaft at least after 8 hours of operation - when the
shaft is entirely moved apart and impurities have already been cleaned.
6.6
Post-seasonal maintenance
Includes all activities specified in the item “Maintenance after work”. In addition, the
machine should be stored under shelter, on a flat and hard surface. Attention should be paid
to the tightness of paint coat. If there are any defects in the coat, clean the spot and apply a
new protective coating.
6.7
Scrapping, environment
In the event the machine is worn to the extent which prevents its further use, it should be
scrapped. This also applies to regular repairs and replacement of damaged parts. Clean the
machine thoroughly before scrapping. Drain oils from the machine and have the machine
decommissioned. Next, disassemble the machine by segregating its parts based on the applied
materials. Segregated parts should be transported to a scrap yard or disposed of.
The machine is 100% environmentally friendly. 97% of the materials used in the production
process are recyclable. Worn machine parts must be disposed of in line with the local
environment protection regulations. Prevent oil leakage throughout the period of use of the
machine, as oil may pollute the environment.