TALEX Spółka z ograniczoną odpowiedzialnością
Spółka komandytowa
ul. Dworcowa 9c
77-141 Borzytuchom
tel. (59) 821 13 40
e-mail.
en.talex-sj.com
10
Fig. 1 – Overall view of the Bocian swather
The Bocian swather is made of two main structural elements. The first element – the suport
frame with the transport unit is made of steel elements connected with each other by
welding, constituting a compact and durable construction. The second element – the
swather-rake drive unit consists of an angular hear, chain tranmission, shaft bearing with
spring teeth attached. The whole machine is built up with safety guards. In addition, the
machine has road wheels which guide the machine during operation and adjustable rear
guards that allow accurate width adjustment after tedding.
Basic quipment and fittings
The swather’s basic equipment includes:
•
Wheels,
•
Support foot,
•
User manual,
•
Warranty card.
The basic equipment of the machine does not include a triangular plate for low-
speed vehicles. It can be purchased at an additional cost from the producer or
agricultural equipment store. Every machine user should have an efficient slow-
moving vehicle distinctive plate. Failure to wear it during transport may result
in an accident. The machine user is responsible for any damage caused by an
accident.
