Talet Equipment Postmaster 87 Series, Руководство по эксплуатации и обслуживанию

Страница: 30 / 40

Operating Instructions
General Information
After reading all “Safety Precaution” and following the “Mounting Instructions” in this manual you are ready
to operate your Postmaster.
In this section you will find operating instructions for the Postmaster and Postmaster with Grapple.
Postmaster Operation
If you have purchased a Postmaster with Post Grapple Assembly, we recommend that you use your
Postmaster without the grapple a few times before installing.
1. The basic Postmaster requires a second person to position the fence post. This person will set the
fence post at the desired location and grasp the post securely making sure his hands are at least 30”
from the top of the post.
2. After the post is in position
the skid-steer operator can
move the skid-steer into
position with the arms raised
and the Postmaster
positioned directly over the
top of the fence post.
3. Lower the Postmaster onto
the top of the fence post
(ensuring that the post is inside of the collar. Keep lowering until the collar and head assembly have
moved up approximately 2 inches. This can be measured by watching the back of the unit which is
visible from the skid-steer operators seat.
4. After the second person
has cleared the area,
continue lowering the
Postmaster onto the post
approximately 24 inches.
This can be measured by
noting when the post guide
is approximately 6 inches
above the first
reinforcement plate.
5. The Postmaster can now
be activated by turning the
auxiliary hydraulics to the
forward or locking position.
29