2
Thank you for purchasing the Talent PSS210 Portable PA System. The PSS210 provides the sound and features of a full-
size PA system in a very lightweight, grab-n-go format. A plethora of input options including mic, line, MP3 and Bluetooth
make the PSS210 perfect for a wide variety of applications.
WARNING:
When using electrical products, basic cautions should always be followed, including the following:
1. Read all instructions thoroughly before operating this device.
2. Keep these instructions for future reference.
3. Pay attention to all warnings and follow all instructions as outlined here. Failure to do so can result in injury to yourself
or others, and/or damage to your equipment.
4. Do not use this device near water or in environments with high humidity, or anywhere it can become wet.
5.
6. Clean only with compressed air, and/or a dry cloth.
7. Do not cover any of the ventilation openings or the heatsink.
8. Do not install or use near any heat sources such as radiators, heat registers, stoves or other devices (including ampli-
9. Do not remove or bypass the grounding-type plug on this device. The plug has two blades and a third grounding plug,
electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked or driven on, from being tripped over, or from being otherwise compromised
in any way.
11.
, or sold with the device. When a
cart is used, use caution when moving the cart/device combination to avoid injury from tip-over.
12.
13. Unplug this device during lightning storms or when unused for long periods of time.
14.
,
e.g., the power cord or plug is damaged, liquid has been spilled or objects have fallen into the device, the device has
been exposed to rain or moisture, does not operate normally, or has been dropped.
15. Do not open this device’s case; there are no user serviceable parts inside.
16. Never break off the ground pin. Connect only to a power supply of the type marked on the unit adjacent to the power cord.
17. This device is sold with a standard U.S.-style IEC power cord. For use in other areas a different kind of cord may be
required, and may be purchased locally.
18. The on/off switch in this unit does not break both sides of the primary mains. Hazardous electrical current can be
present inside the chassis, even when the on/off switch is in the off position.
3
FRONT PANEL
1. MICROPHONE INPUT (CH 1-3):
Balanced 3-pin XLR jack for low
impedance microphones.
2. LINE INPUT (CH 1-3):
Unbalanced 1/4" input for high impedance
microphones or other line level devices such as keyboards.
3. MIC/LINE SELECTOR (CH 1-3):
Leave this button in the up position
for microphone connection; depress the button for line level input.
4. PEAK INDICATOR (CH 1-4/5):
This LED will light when the input
signal is being overdriven.
5. CHANNEL HIGH FREQUENCY EQ (CH 1-4/5):
This knob should generally be set in the center (12 o’ clock) position
to start with. To increase high frequency response from the individual channel, turn this knob to the right. To reduce
the high frequencies, turn the knob to the left.
6. CHANNEL LOW FREQUENCY EQ (CH 1-4/5):
This knob should generally be set in the center (12 o’ clock) position
to start with. To increase low frequency response from the individual channel, turn this knob to the right. For less low
frequency impact, turn the knob to the left.
7. CHANNEL FX LEVEL (CH 1-4/5):
Level control for the effects on the individual channel; turn this knob to the left for
less effects, or to the right for more effects.
8. CHANNEL LEVEL CONTROL (CH 1-4/5):
Level control for the individual channel; turn this knob all the way to the left
before connecting anything to the channel, then gradually turn it to the right to increase the output level of the individ-
ual channel after all connections have been made.
9. CHANNEL 4 (LEFT) LINE INPUT:
1/4" input jack for channel 4
10. CHANNEL 5 (RIGHT) LINE INPUT:
1/4" input jack for channel 5
11. MEDIA PLAYER:
, pause, stop, skip, or
a) Mode:
USB
→
SD card
→
Bluetooth (BT network name: PSS210). Press and hold for 3 seconds to turn the MP3
player on/off.
b) Play/Stop
c) Skip Back
d) Skip Forward
e) Repeat mode:
→
RONE (repeat the currently playing track)
→
RALL (repeat all tracks in order).
CONTROLS, CONNECTIONS, AND FUNCTIONS
FCC warning:
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment
should be installed and operated with minimum distance 20cm between the radiator & your body.
