6
1) MAIN OUTPUT CONTROL
Slide fader used for adjusting the final
L/R output level sent to the MAIN output
sockets.
2) OUTPUT LEVEL METER
This level meter indicates the signal
level of the stereo MAIN output (Left and
Right).
3) POWER INDICATOR
Indicates proper working status of the
internal DC power supply.
4) +48V PHANTOM POWER SWITCH
AND INDICATOR
This switch is used for turning on or
off +48V phantom power to operate
condenser microphones. When this
switch is pressed down, +48V will be
present on the XLR socket of each
microphone input channel. PLEASE
NOTE: Minimize all channel fader levels
before turning on/off this switch. Don’t
plug or unplug microphones after this
switch is turned on (causes loud pops!).
Don’t turn on the switch when a dynamic
microphone is in use.
5) AUX RET
Controls the signal level feed to the stereo
MAIN buses from the auxiliary return
sockets.
6) AUX SEND
Master control of the signal level sent to
the AUX SEND socket.
7) 2TK TO MIX
When this switch is pressed down, the
signal from the 2TK RET input sockets
can be fed to the MAIN bus output
sockets.
8) 2TK TO CTRL RM
Press down this button to feed the 2-track
input signal (2TK RET) to the control
room and headphones (PHONES/CTRL
RM). Release it to feed the MAIN signal
to the control room and headphones.
9) PHONES / CTRL RM
This knob controls the signal level to the
control room and headphones.
MASTER CONTROL
SECTION
CONTROL PANEL
