8. Troubleshooting
Here are some troubleshooting suggestions:
A.
The fixture does not work, there is no light output.
1.) Check the connection of power and main fuse.
2.) Measure the voltage output on your power receptacle to ensure proper
voltage.
B.
Fixture does not respond to DMX control.
1.) DMX LED should be on. If not, check DMX connectors and cables for
proper connection.
2.) If DMX LED is on but not responding to a channel, check the DMX
address settings and DMX polarity.
3.) If you have intermittent DMX signal problems, check the pins on the
cable connectors and on the fixture.
4.) Try to use a different DMX controller.
5.) Interference may occur if DMX cables are run alongside high voltage
cables.
C.
Fixture responds erratically to DMX control.
1.) You may have a break in the DMX cabling. Check the LED for the
response of the master/ slave mode signal.
2.) Wrong DMX address in the fixture. Set the fixture to the proper
address.
3.) Use of microphone cables for DMX connections can cause errors
D.
The fixture doesn't respond to sound.
1.) Make sure the fixture is not set to receive a DMX signal.
2.) Check the fixture's internal microphone by tapping the microphone.
Notes
