Talaris ntegra 177-0800, Руководство пользователя

Страница: 55 / 66

Ntegra Ntegra Options
TP05413021 Interim Page 47 of 56
Copyright © 2009 by Talaris Ltd., Basingstoke (UK)
6 Ntegra Options
6.1 Serial Number Scanning
In Serial mode, the notes MUST be placed in the input hopper serial number side
DOWN .
Using the “UP” navigation key, set the Ntegra in the “Serial” mode.
If required, press the BATCH key to enable the batch limit in quantity of notes. If
it is required to batch by value, press the BATCH key again. If a batch quantity, or
batch value, other than the default batch limit is required, enter the batch limit
using the numeric keys, followed by the ENTER key.
Select AUTO or MANUAL start mode.
Place the notes to be counted on the input hopper. In the AUTO mode, the
Ntegra will start as soon as notes are placed on the input hopper. With the Ntegra
in the MANUAL mode, press the START/STOP key to commence the count.
When a batch or count is complete, press the PRINT key to transmit the list of
serial numbers to the integral or external printer.
6.1.1 Serial with ADD Function
Select the ADD function.
Place the notes to be counted on the input hopper. In the AUTO mode, the
Ntegra will start as soon as notes are placed on the input hopper. With the Ntegra
in the MANUAL mode, press the START/STOP key to commence the count.
The Ntegra will count the notes, and display the value total.
If notes were rejected, these notes are not included in the count value. The
number of notes rejected is shown on the display. Press the RIGHT navigation
key to see the reason the notes were rejected.
Press the ESC/CLR key to return to the value display.
Remove the rejected notes from the Reject Pocket. Re-count all acceptable
notes.