TALARIA STING R L1E, Руководство пользователя

Страница: 43 / 53

TALARIA POWER TECH
Maintaining Your Motorcycle
axle as 45-55N.m and the locking torque of rear axle nut as 50-60N.m. The locking torque of the front wheel axle is 15N.m.
Caution: Hold the brake lever tightly. If the brake still can’t achieve the ideal braking function, check whether the brake disc is clean. If the problem is
still not solved, send the motorcycle to the nearest dealer for inspection and maintenance.
Battery Inspection:
The motorcycle equipped with a sealed lithium-ion battery. Fully charge the battery before inspection, and then use a multimeter to measure the
voltage for cathode and anode. The full voltage should be between 65.5–67.2. Otherwise, please send the motorcycle to the nearest dealer for
inspection and maintenance.
Caution: Please power off the motorcycle before removing or installing the battery. If the battery cannot be pushed in, do not operate it by force. Pull
out the battery and check whether it is stuck by something.
Inspection for brake oil level
Inspect the brake oil level for front and rear brake through the brake fluid reservoir. If the brake
fluid level is low, then, need to open the brake fluid container cap to add the specified mineral
fluid for the disc brake.
Note: Before checking the brake fluid level, the electric motorcycle should remain upright.
1. Remove the two M3 screws from the brake fluid container cover.
2. Add the specified mineral fluid (Type No.: HF10-2) for disc brake.
3. Check the sealing cover for any wears or damages, and make sure it’s in the correct
position.
CAUTION:
Do not spill the brake fluid on the paint surface; otherwise, it may cause cracks on the surface of the paint parts.
Before removing the brake fluid container cover, be sure to place a clean rag under the brake oil container.
At low brake fluid level, there may be brake pad wear or leakage of hydraulic system. Check the brake pads for wear and/or the hydraulic system for
Brake Fluid Reservoir