
35
Troubleshooting
Symptom
Possible Cause
Resolution
Power loss
Weak battery
Refer to Wiring and Battery
Information.
Loose or corroded battery
connections
Propeller is loose, damaged, or off-bal
-
ance
Refer to Maintenance.
Wiring or electrical connection faulty
Wire gauge from the battery to
the trolling motor is insufficient.
Six-gauge wire is
recommended.
Weeds, fishing line, or debris wrapped
around propeller
Remove weeds, fishing line, or
debris from propeller.
Excessive noise, vibration
Motor shaft is bent
Refer to Warranty Information.
Propeller is loose, damaged, or off-bal
-
ance
Refer to Maintenance.
Motor Motor failure (all speeds)
niet (alle toerentallen)
Weak battery
Refer to Wiring and Battery
Information.
Loose or corroded battery
connections
Electrical
Check the connector for a loose
or damaged connection. Refer
to Wiring and Battery Information.
Fuse on circuit breaker is open
Replace the fuse or reset the
circuit breaker only after
determining the root cause of
the problem.
Motor failure (one or more
speeds)
Propeller is loose, damaged, or off-bal
-
ance
Refer to Maintenance.
Wiring or electrical connection faulty
Refer to Warranty
Information.
Difficulty removing propeller
Bent propeller pin
Hold one blade and lightly tap
the opposite blade with a
rubber mallet.
Use a putty knife on both sides
of the propeller to apply equal
pressure.
Bent armature shaft
Refer to service center.