Takuma e-foil jet Скачать руководство пользователя страница 6

/

 38 

EN

/

 38 

Avoid any form of impact or physical damage.

Always inspect before every use.

Do not use if there’s visible damage or cracks on the housing, loose screws, 

acidic smell.  Doing so can lead to fire.

Do not let the connectors come in contact with water or wet hands.

Make sure there is no corrosion in the battery before connecting to your 
E-FOIL JET or charger.

After use, make sure battery cap is completely dry before screwing back on.

Only use the charger supplied to charge the battery.

The battery charger must be used in a standard voltage outlet (110V or 
220/230V).

Always charge your battery in a dry place.

If the battery has been exposed to water, place it in a cool dry place until it 
is totally dry.

If a charger is wet, stop using it immediately.

Never leave unattended while charging.

Do not leave the charger plugged in when not used.

If the battery is not to be used for a long time, then it needs to be charged 
every 3 month to 80% in order to preserve its lifespan.

1.2.6  Electronic Speed Control (Jet ESC)

The Jet ESC is mounted inside the TAKUMA 
E-FOIL JET. 

It allows you to vary the jet’s speed via the 

remote control.
It is controlled by the remote control. 

 

Connectors:

Never allow sand and/or water to get in the connectors of the Jet 

ESC or battery, or it may cause significant damage.

Only use the Jet ESC for the Jet propulsion. Using the regular non 
Jet ESC from Takuma will cause irreversible damage to the Jet 
propulsion.

Do not use other ESC than the Jet ESC sold by TAKUMA. Any damage caused 
by the use of another ESC will not be covered by warranty.

If the product is not to be used for an extended period, the Jet ESC must be 
stored so as to remain clean and dry.

Keep the Jet ESC away from sources of heat and out of direct sunlight. Avoid 
any high temperatures.

Do not leave or use the Jet ESC near fire.

Do not alter or disassemble the Jet ESC.

Prevent any impact with the Jet ESC and do not drop it.

If your Jet ESC is damaged, contact your TAKUMA authorized dealer for further 
assistance.

1.2.7  Remote control

Do not open the remote control case.

Do not modify or disassemble the device. If the device becomes damaged, 
stop using it immediately.

Do not expose this device to extreme temperature. 

Never use the device near medical devices and/or near a person with an 
electronic medical device (such as pacemaker, etc.).

Do not use the device in an airplane.

Содержание e-foil jet






















Отзывы: