Takstar WDA-500, Руководство пользователя

Страница: 37 / 40

36
■ Caution
To avoid electric shock, over temperature, catching fire, explosion, mechanical risk
and hurt or property loss caused by improper use, please read the following items
carefully before operation:
1. Please check if the power of the connected equipment matches with that of this
product before operation. Adjust the volume to proper level during operation.
Do not operate at over-power or high volume level for a long time to avoid
abnormal functioning or hearing loss.
2. If abnormal phenomenon (smoke, abnormal smell) happens, please turn off the
power switch and disconnect the power plug with power socket, and send the
product to local dealer for maintenance.
3. Using battery of broken insulation material is forbidden to avoid short circuit.
Please do not charge the non-rechargeable battery.
4. Put the waste battery into classification dustbin rather than used as toy by
children or discarded directly to avoid potential danger or affecting the
Environment.
5. If this product will not be used for more than one week, take out the battery to
prevent from damage due to battery leakage.
6. The product and accessories should be put in dry and ventilated place rather
than humid or dusty environment. Prevent the product from liquid, rain, water,
over-colliding, throwing, vibrating, vent hole covered to avoid function
Destroyed.
7. Put the product 60cm away from PC/TV due to the strong magnetic field.
8. When the product needs to be installed on wall or ceiling, please fix it tightly to
avoid dropping risk.
9. Please abide by safety rules during operation. Do not use the product in the place
prohibited by regulation or law to avoid accident.
10.Do not disassemble or repair the product by yourself to avoid hurt. If you have
question or need service, please contact the local dealer. Please use the
accessories designated by supplier.
11.Please use the supplied adapter for charging. If you want to buy one, please buy
one with CCC certification and meeting the requirement of standard (voltage less
than 12V and current less than 1A).