Takstar WDA-500, Руководство пользователя

Страница: 29 / 40

28
C. Headworn microphone
① Power switch: The microphone is turned on when the switch is in the ON position,
and the microphone is turned off when the switch is in the OFF position.
② Display screen: Display working channel and microphone volume.
③ M button: Used for frequency matching. Refer to " matching frequency" section
for details.
④ + button: Press it to increase the volume of the microphone. In the matching state,
press it to switch to the previous channel, and long press it to quickly switch
channels.
⑤ - button: Press it to decrease the volume of the microphone. In the matching state,
press it to switch to the next channel, and long press it to quickly switch channels.
Headset microphone Display screen
3. Frequency information: displaying the current mic operation frequency,
（ 650MHz~670MHz ） 15 frequencies in all. During fr equency matching, it flashes.
4. Volume information: when mic volume is adjusted, the screen displays“U 00”.
This means the mic volume level. After 3 seconds, it displays the frequency
information.
Loading mic batteries
Turn the mic tail section counterclockwise to open the battery compartment and
load two AA batteries according to correct polarity. Turn it clockwise to assemble.
Refer to the figure below.