Takstar TS-K201, Руководство пользователя

Страница: 24 / 32

23
2 . Changing frequency method
① After matching is successful, turn on the transmitter and receiver.
② Press mic CH button, channel （CHXX）flashes on the display, and it
enters into changing frequency status.
③ Press “ ∧” or“ ∨” button in 8 seconds to change channel number.
Press “CH”button to confirm.
④ If “CH”button is not pressed for confirmation in 8 seconds, the
frequency stops flashing and it fixes to the currently selected frequency.
H . Correct holding method
1. Put the mic away from mouth in a range 5 ～ 15CM. Too close range leads to
signal distortion. Too far range leads to reducing S/N ratio.
2. Hold the middle section of mic housing. Do not hold the mic grille to avoid
feedback. Do not hold the tail section of microphone to avoid affecting
microphone signal.
3. Put the mic away speaker as much as possible. Do not point the mic to the
speaker to avoid feedback.
Holding diagram
Portable wireless microphone
TS-K201