Takstar SGC-200W, Руководство пользователя

Страница: 33 / 40

31
Volume adjusting method
Matching frequency method
Monitor volume adjusting
1. Press SET button of the receiver, “PHONES：XX”flashes (XX means the
number displayed).
2. Press + to increase monitor volume and ‒ to decrease (12 levels for selection).
3. Keep pressing SET button to confirm and exit.
Recording volume adjusting
1. Press SET button of the receiver. “OUTPUT：XXdB” flashes (XX means
number displayed).
2. Press + to increase recording volume and ‒ to decrease (-10dB～12dB for
selection).
3. Keep pressing SET button to confirm and exit.
Note: due to DSLR/pro camera/cell phone/iPad have different requirement on
recording input gain, adjust the output recording volume from recording
equipment to the receiver properly, e.g. the recording output volume of
DSLR/pro camera should be decreased properly, or the recording output
volume of cell phone/iPad should be increased properly. The standard is that
the recording has no noise or distortion.
The frequency has been matched in factory. If there is signal interference,
match the frequency in the way below:
A: Matching of mono model
一、Matching automatically(keep the transmitter away from the receiver less
than 1m）.
1．Keep pressing SET button of receiver for 2 seconds. Frequency flashes on
LCD. Release the button. Keep pr or ‒ button till the frequency
changes from flashing status to “— — —” status. This means it enters into
frequency scanning status. Release the button.
SGC-200W
Wireless Camera Microphone