Takstar SGC-200W, Руководство пользователя

Страница: 30 / 40

SGC-200W
Wireless Camera Microphone
28
Operation instruction
1. Loading battery: open the battery compartment and load two AA batteries
according to right polar. Refer to the figure A below.
2. Plug the microphone connector into the transmitter MIC connector. Refer to
the figure B below.
1. Insert the receiver cold shoe into the hot shoe slot of DSLR or interchangeable
lens digital camera. Turn the knob clockwise to fix it. Refer to the figure
below.
2. Connect one end with nut of 3.5mm audio cable with OUTPUT connector of
the receiver, and the other end with MIC connector of the camera. Refer to
the figure below.
3. Link the monitoring headset (buy additionally) with PHONES connector of the
receiver. Refer to the figure below:
4. Turn on DSLR/interchangeable lens digital camera to test if the system works
normally. If not, refer to the trouble shooting section to solve the problem.
5. According to the actual situation of DSLR/interchangeable lens digital camera
and monitor headset, adjust the recording output and monitor output
properly. Refer to the volume adjusting section for the details.
Transmitter installation and connection
DSLR/interchangeable lens digital camera installation and connection
figure A
transmitter
figure B
microphone