Takstar OD200, Руководство пользователя

Страница: 20 / 26

Operating Instructions
Instrument Speaker
OD200
19
Wireless Playback Pairing
When using the device for the first time, it needs to be paired and connected
with your phone or wireless playback device. Follow these steps:
1. Turn on the power switch of the speaker. The wireless playback function
will automatically activate, and the wireless playback indicator will start
blinking blue, indicating that it is in pairing mode.
2. Access the Settings menu on your phone and enable the wireless
playback function. Search for TAKSTAR OD200 and establish a connection.
The indicator light will change from blinking to solid blue, indicating a
successful connection.
3. To disconnect the playback, press and hold the wireless playback switch
for 5 seconds.
Live Streaming and Recording
Connect one end of the supplied OTG data cable to the OTG interface on the
speaker, and the other end to your Apple or Android phone. Use the recording
volume knob to control the overall recording/streaming volume level, and
adjust the mic and music volume knobs to change their relative ratio to
desired levels. Press the charging switch to enable charging while live
streaming. Release the switch to stop charging.
Daisy-Chain Connection
1. Two Speakers in Series: The serial switch on the first speaker (not
pressed) should be in the raised position, while pressed on the second
speaker. You can record the sound from both speakers on the second
speaker, or record only the first speaker's sound on the first speaker.