Takstar M-2F Series, Руководство пользователя

Страница: 18 / 24

17
② Align the infrared window of the transmitter with the infrared window of the receiver in a
straight line, and keep the distance between them within 1 meter.
③ Press and hold ▲ button (A side corresponds to left channel, and B side to right channel),
the screen on the corresponding channel will display "55--" (refer to the figure below). After a
few seconds, the "00--" on the screen will disappear. At this point, if the frequency displayed on
the transmitter matches the frequency displayed on the receiver, it indicates successful pairing.
IV. Automatic Search for Free Channels and Pairing
When powered on, press and hold ▼ button to the automatic search for free channels and start
pairing:
① Turn on the power switch of the mic (handheld or bodypack).
② Align the infrared window of the transmitter with the infrared window of the receiver in a
straight line, and keep the distance between them within 1 meter.
③ Press and hold ▼ button, the screen will display a flickering "99-0XX" symbol, where 99 to 00
represents the number of channels being searched, and 0XX indicates the level of noise signals
relative to the channel. The system will automatically find a channel with lower noise signals.
If usable frequencies or channels are found, the system will automatically save it and start
pairing. The screen will display "55--", and after a few seconds, the "00--" on the screen
disappears, indicating that the system has completed the entire process and automatically saved
and exited.
④ Pressing ▲ button during the automatic search and pairing process can cancel the operation
right away.
M-2F SERIES
Wireless Microphone