Takstar M-2F Series, Руководство пользователя

Страница: 17 / 24

16
Operating Instructions
I. Frequency/Channel Adjustment & Display Mode Switching
1. Frequency/Channel Display Mode Switching
By default, the system displays the frequency status when powered on. Press SET button briefly
to switch between frequency and channel mode. On the screen, FREQUENCY MHZ flickers when
it's in frequency mode. Press SET button again to switch to channel mode, in which case CHANNEL
flickers. Once set, the system automatically saves and exits editing after 3 seconds.
2. Frequency Adjustment
When the system is powered on and displaying the frequency, press SET button briefly to enter
manual frequency editing mode. The corresponding frequency digits on the screen start to flash.
Press ▲ or ▼ buttons briefly or press and hold to adjust the frequency until the desired value is
reached. Once set, the system automatically saves and exits editing after 3 seconds.
3. Channel Adjustment
When the system is powered on and displaying the channel, press SET button once to enter the
manual channel editing mode. The corresponding channel number CH-XXX (XXX ranging from
000 to 099) on the screen starts to flash. Press ▲ or ▼ buttons briefly or press and hold to adjust
the channel until the desired value is reached. Once set, the system automatically saves and
exits editing after 3 seconds.
II. AI Intelligent Adjustment
When powered on, press S/O button briefly to switch between AI intelligent modes.
There are three modes available: L (Low), H (High), and Auto.
① L Mode: With slightly weaker signal reception but stronger interference resistance, suitable
for short distances and when multiple receivers are used together.
② H Mode: With strong signal reception, suitable for long-distance use.
③ Auto Mode: AI automatic mode which switches to L mode when the mic transmitter is close to
the receiver, and switches to H mode when the mic transmitter is far from the receiver.
III. Infrared Sync Operation
When powered on, press and hold ▲ button to enter infrared pairing mode. Follow the steps
below:
① Turn on the power switch of the mic (handheld or bodypack).
M-2F SERIES
Wireless Microphone