Takstar E500W, Руководство пользователя

Страница: 18 / 24

Wireless Amplifier
E500W
17
Operation Instructions
A. Pairing Method
The products are paired by factory default and will automatically connect to each
other once powered on. No extra pairing is required. If there is signal interference,
follow the below steps to re-pair or change frequency:
Handheld Microphone:
1. Pairing Method
① Power up both mics by long pressing their power buttons, their LED indicator
should light up green. Then press their power buttons twice to enter pairing mode,
indicated by flashing green LED indicator. Meanwhile, immediately power up the
amplifier, wait until the flashing LED on handheld mic turns solid green to finish
pairing. You should be able to hear voice amplification when talking to the mic.
② If there is no sound when you talk to the handheld mic, that means the pairing
is not successful, please retry the above steps to re-pair.
2. Changing Frequency
① Power up both the amplifier and handheld mic. After successfully paired, press
the power button on the mic once to change frequency. If successful, the green
indicator should flash for 1s before resuming solid green.
Note: Wireless handheld mic A & B each has 20 adjustable frequency channels.
Mic A: CH01-CH02; Mic B: CH21-CH40.
Headset Microphone:
1. Pairing Method
①
First, power off both the headset mic and the amplifier. Next, power up
the headset mic, long press mic [M] button for 3s until its LED display shows
a circle. Then, immediately power up the amplifier, wait until the headset
mic's LED circle changes into a static number. Talk towards the mic to test if
your voice is amplified and if pairing is successful.