Takstar E500W, Руководство пользователя

Страница: 14 / 24

① Power switch: rotate the dial to MAX until you hear a click to power on the
device and then gradually increase the volume level. Once powered on, the LED
display shows “UHF”, meaning the device is ready for voice amplification.
Likewise, rotate to OFF to gradually decrease the volume level and eventually
power off the device when you hear a click.
②
LED digital display: display information such as the current work mode,
battery level and mic working channel. It shows “BLUE” in Bluetooth mode,
“HLOH” in karaoke mode, “TF” in TF card mode, “USB” in USB mode,
“AUX” in audio input mode, and “REC” in recording mode (Note: you
can only switch to recording mode when a storage device and a mic are
both connected). is the battery level symbol which flashes when power
is low (less than 1 hour left) and requires charging in time. “— — — —”
shows up when the amplifier is in standby status which can be wakened
up by any key press.
③
M mode button: when powered on, press it to switch among six work
modes, accompanied by corresponding voice prompt. In karaoke mode,
long press M button to switch among low-reverb, medium-reverb and
high-reverb settings. Once an AUX audio source or a TF card is inserted,
the device will automatically switch to AUX mode or TF mode, and upon
disconnected, switch to the next work mode. While a storage device and
a mic are connected, long press this button to enter recording mode,
accompanied by a “REC” symbol on LED display and a “Recording
mode” voice prompt. During recording, the LED display shows recording
duration in “00:00” format. Long press this button again to exit and save
recording. Upon exiting recording mode, the device will automatically play
the newly recorded audio in a loop.
Wireless Amplifier
E500W
13