Takstar E261W, Руководство пользователя

Страница: 9 / 13

Handheld microphone
1. Frequency matching method
① The microphone and the receiver are turned off. First, turn on the power switch of the
microphone.
② Open the tail cover of the microphone and long press the "CH" button for 3 seconds.
When the channel on the display screen changes to "----" dynamic display, release the
button, and immediately turn on the power switch of the amplifier to start frequency
matching. If the power switch of the amplifier is not turned on within 10 seconds, the
matching fails.
③ Frequency matching is completed in about 5 seconds. When "----" dynamic display on
the microphone changes to channel (CHXX) static display, and the sound is amplified,
it indicates that the matching is successful.
④ If the matching fails, repeat the above steps.
2. Frequency conversion method
① Turn on the power switches of the transmitter and the receiver when the matching is
successful.
② After the "CH" button of the microphone is pressed, the channel (CHXX) on the display
screen flashes and the microphone enters the state of frequency conversion.
③ Press the "∧" or "∨" button within 8 seconds to switch channels, and press the "CH"
button for confirmation.
④ If you do not press the "CH" button for confirmation within 8 seconds, the frequency
will automatically stop flashing and the currently selected frequency will be fixed.
Headset microphone
1. Frequency matching method
① First, make sure that the headset microphone and the amplifier are turned off. Then,
turn on the power switch of the headset microphone, long press the "M" button for 3
seconds, and release it when the display turns into a circle. At this time, turn on the
amplifier immediately. When the display on the microphone changes from a circle to a
static value, and the indicator light of the amplifier changes from a fast flashing blue
light to a steady blue light, speak into the microphone. If there is sound output, it
indicates that the matching is successful. If the power switch of the amplifier is not
turned on within 10 seconds after the microphone enters the matching state, the
matching fails and the display changes from a circle to a static value.
② If there is no sound output when you speak into the headset microphone, it indicates
that the matching is unsuccessful. Please try again by repeating the above steps.
Portable wireless amplifier
19
E261W