Takstar E261W, Руководство пользователя, Страница: 8 / 13

Open the tail cover of the microphone counterclockwise, install 2 AA batteries according
to the positive and negative polarity marked on the battery compartment (pay attention
not to install the batteries reversely), and tighten the tail cover of the microphone
clockwise as shown below.
Tip: When the battery indicator on the microphone display flashes, it means that the
batteries are running low. Please replace them in time.
Press the M button repeatedly to turn on or off the wireless playing function. The wireless
playing function is off by default when the amplifier is turned on. When the amplifier is
used for the first time, it needs to connect to a mobile phone or wireless playing
equipment. The steps are as follow.
1. Long press the power button to turn on the amplifier, and then press the "M" button.
The working indicator flashes red and blue alternately, indicating that it is in the state
of searching and matching.
2. Enter the "Settings" menu of the mobile phone, find the option of wireless playing
function, and turn on the wireless playing function of the mobile phone. After searching
for "TAKSTAR E261W", tap "TAKSTAR E261W" to connect, and the working indicator will
be on again, indicating that the connection is successful.
The frequency has been matched by default when the product leaves the factory. It will
automatically connect when turned on without frequency matching. In case of signal
interference, you can try frequency matching again or frequency conversion according to
the following methods.
Portable wireless amplifier
18
Instructions for use
Battery installation
E261W
Wireless playing matching
Frequency matching methods