①
2
PARTS DESCRIPTION
1
PRODUCT DESCRIPTION
M4×20 : 6
M4×6 : 2
●This sensor requires only one-side wiring, so can be
used in places where it is difficult to wire on two sides.
●Both beam reception level and detection distance are
monitored to form a stable protection line.
●The optical unit inside the sensor is adjustable by ±90°horizontally,
and ±5°vertically for flexibility in various applications.
●Beam alignment can be adjusted only on the sensor side by utilizing the
viewfinder, monitor output, and sound check function.
●Environmental trouble signal is output when the beam reception level is
reduced below an acceptable level.
SENSOR
REFLECTOR
Terminals
Horizontal
adjustment
Vertical
adjustment
screw
Cover
Mounting plate
Grommet
Lens unit
View finder
ACCESSORY
OPTIONALS
Instruction Manual
PR-30BE
PHOTOELECTRIC BEAM SENSOR
Transmitter
Sensor
Receiver
Reflector
Monitor jack
Monitor jack
Alarm LED
Self-tapping
screws
φ4×30 : 5
Push rivet
Pole bracket
: 2pcs.
Pole mounting plate
: 2pcs.
BL-11
L fittings
Countersunk
oval-head screw
Screw
※Sensitivity attenuation
/Environment LED
※Sensitivity attenuation
/Environment LED
Cover open
: Sensitivity attenuation LED
Cover close
: Environment LED
The PR-30BE, adopting Time of Flight technology, consist of a
sensor (integrating both a transmitter and a receiver inside)
and a reflector. As illustrated, an infrared beam, projected by
the transmitter is reflected back to the receiver, forming a
protection loop along the path.
When the protection loop is interrupted, the receiver initiates
an alarm. The receiver not only monitors the change in the
amount of light that is reflected and returned, but also measures
and monitors the time (distance) of the return. As a result, stable
protection line can be constructed by preventing the surrounding
environment and material/color of any shielding objects from affecting the detection.
Monitor output
changeover switch
Function setting
switch
Distance setting
button
(Note)
: OUTDOOR 30m (100 ft.)
: INDOOR 40m (135 ft.)
Thank you for purchasing our photoelectric beam sensor.
This sensor will provide long and dependable service when properly installed.
Please read this Instruction Manual carefully for correct and effective use.
Please note : This sensor is designed to detect intrusion and to initiate an alarm ; it is not a burglary-preventing device.
TAKEX is not responsible for damage, injury or losses caused by accident, theft, Acts of God ( including inductive
surge by lightning ), abuse, misuse, abnormal usage, faulty installation or improper maintenance.
The cover includes a
photocatalytic coating for
weather protection.
Avoid clearning with a
cloth.
