Instruction Manual
FS-1000E
FLAME SENSOR
We appreciate your purchase of TAKEX flame sensor.
Please read this instruction manual carefully for correct and effective use.
This sensor is designed to detect flames and to initiate an alarm, it is not a fire-preventing device.
TAKEX is not responsible for damage, injury or losses caused by accident, theft, Acts of God (Including inductive surge by lightning), abuse,
misuse, abnormal usage, faulty installation or improper maintenance.
This sensor detects Ultraviolet rays in the flames and initiates an alarm.
It does not detect smoke, heat.
1
PARTS DESCRIPTION
PRODUCT DESCRIPTION
Wiring hole
Detection window
Wiring hole
Wiring hole
Battery connector
Front mark
Battery cover
Buzzer (Built-in)
Battery case for type-AA
(1 piece)
Sensor locking screw
3×6 (1 piece)
Tapping screw
4×25 (2 pcs.)
φ
φ
LED
Mode selector
Terminals
Locking screw hole
Release lever
Knockout
【
BASE UNIT
】
【
SENSOR UNIT
】
■
ACCESSORY
Flame sensor FS-1000E is designed to detect ultraviolet rays contained in flames, and to initiate an alarm.
This sensor can be operated for 2years with popular type-AA alkaline battery 2 pcs.
Also, by wiring, external power supply (9V DC
〜
30V DC) is available.
The equipped output terminal enables remote control of other warning devices, and system operation with a
control panel.
Easy separation of the sensor unit and the base unit is very useful for simplifying installation and maintenance.
※Type-AA battery is not included
