![background image](http://html1.mh-extra.com/html/takeuchi/tl8/tl8_operators-manual_3340166019.webp)
1-7
SAFETY
10. During daily operation of the machine,
the occurrence of exhaust leaks are
usually accompanied by a change or
increase in engine exhaust noise levels.
These audible warnings cannot be
ignored. Should any exhaust leaks occur
during operation, the machine must be
shut down immediately and not put back
to work until the necessary repairs have
been completed.
11. Before starting repair work, such as
welding, the surrounding area should be
cleaned and a fire extinguisher should be
close by.
12. Do not use the machine on top of or to
push piles of burning timber. A machine
fire will likely result.
What to do to prepare for a machine fire
• Prevent the fire from happening in the first
place by ensuring that all machine systems
are frequently inspected and always well
maintained.
• Ensure that any hand held fire extinguishers
are charged and in working order. Fire
extinguishers require routine care. Follow
the manufacturer’s instructions for
inspection and maintenance shown on the
label of the fire extinguisher and in the
extinguisher manufacturer’s manual.
• Ensure that you follow all national, state /
provincial and local regulations dealing with
fire fighting in effect in your specific
geographic region.
• Ensure that all information necessary for
you to immediately contact all sources of
help (local fire department, etc) in the event
of a fire emergency is recorded and readily
available at all times.
What to do if a machine fire occurs
If operating the machine when a fire occurs:
1. Lower all working attachments to the
ground.
2. Shut the engine off.
3. Exit the machine. Call for help. Be certain
to report a fire immediately.
4. At all times ensure your own personal
safety and the safety of anyone that may
be in the area. Approach any fire with
extreme caution. All fires can be very
dangerous and life threatening.
Before deciding to fight the fire, be certain
that:
1. The fire is small and not rapidly spreading.
2. There is always a clear, safe escape route.
3. You have received training in the use of
the available fire extinguishing devices and
are confident that you can operate them
effectively.
• Be aware that engine coolant, diesel fuel or
hydraulic hoses could fail during a fire. If
this happens, hot coolant, fuel or oil could
possibly be ignited by the fire.
• If in any doubt about whether or not to fight
the fire ? DON’T. Instead stand well clear of
the fire and wait for help to arrive.
GENERAL PRECAUTIONS
Содержание TL8
