Takeuchi TB53FR Скачать руководство пользователя страница 40

Страница: 40 / 194

CONTROLS

Doors and Covers

Starter Key

The starter key is used not only to start and
stop the engine, but also to lock and unlock
the following places:

Fuel filler cap

Engine hood

Cab door

Tool case

Manual storage compartment

Lock and unlock

1. Insert and turn the starter key.

Opening
1. Pull the knob (1) towards you and open

the door.
To open the door from inside the cab, push
the lever (2) to the front.

2. Open the door fully and press it against

the cab to lock it in place.

Closing

1. Either push release lever (3) to the front

or lower release lever (4).

2. Close the released door.

E4B003

C4C001

C4C002

Cab Door

WARNING

When mounting and dismounting the
cab, first open the door fully to the locked
position and check that it does not move.

Open the door fully and press it against the
catch at the back of the door to lock it in place.
Always lock the door when mounting and
dismounting and when operating the
machine.

Содержание TB53FR



































































































































































































Результаты поиска

Содержание TB53FR

Отзывы:

Похожие инструкции для TB53FR

Бренды по названию

Популярные бренды

Takeuchi TB53FR, Руководство оператора

Результаты поиска

Содержание TB53FR

Отзывы:

Похожие инструкции для TB53FR

Бренды по названию

Популярные бренды