26.2.2021
.
05-05-0045
3 /
7
Product details
(i)
②
(iii)
(iv)
(v)
(vi)
(vii)
(viii)
*Please make sure to order repair parts by repair part number.
(ix)
If the part number is not ordered, it may not be possible to accept the order.
Please understand this in advance.
Please note that some parts cannot be shipped individually, in which case
please order as a set part number.
*The RPM code, main wiring, gibbons and meter mounting stay not shown in the photo
are not used.
Remove
*⑤ and *⑧
as they are attached to the meter mount stay.
Installation instructions *Refer to the factory service manual for installation instructions and specified torques for details not
specifically mentioned.
attention (heed)
The contents of the work to remove external parts in this instruction manual are only an outline with details omitted.
If you are not familiar with exterior removal work, ask your dealer to carry out the work or always follow the instructions for the
work procedure and tightening torque in the genuine service manual of the manufacturer. When removing and installing the exterior
parts, work carefully to avoid damaging the claw and groove parts.
○ Remove the side cover
.
Remove the ○ seat and remove the negative terminal of the battery
.
Installation instructions *Refer to the factory service manual for installation instructions and specified torques for details not
specifically mentioned.
numb
er
Part name
quan
tity
Repair part
number
1 DN Tachometer
1
2 IG Coil cord (1500 mm)
1 09-05-0142
3 Tachometer subcode COMP.
1 00-00-1993
4 meter stay
1 00-00-2385
5 Meter mount collar
2
6 M4 flange nut
2
7 Plain washer 4 mm
4
8 cushion rubber
2
9 Binding bands 200 mm
4 00-00-0269 (Pack of 10)
