9
Installation of main body
Install the basin
1
* The basin or seat may not be able to be installed correctly depending on installation procedures of the main body.
Always install the main body using the following procedures.
Main body installation procedure
Precaution
• Always use the template to mark the floor when fixing the basin and the seat.
Also, always final confirm the fixing position of the seat by using the base plate H as a guideline.
• If the seat is to be fixed using anchor bolts, check the distance between the seat and the basin with the actual unit.
3 Checks after installation of pipes
1 Install the basin
4 Install the seat
Install base plate H to the basin
Install base plate H to the seat
Install the seat
5 Remove bolts for transportation
After installation
Check inspection items
10 Check operation (2)
(after attaching the backrest and seat)
Attach neck cushion
2 Attach piping
7 Attach the base cover
After attaching the base cover,
install base plate F to base plate H.
8 Check operation (1)
(after assembling the seat)
9 Attach backrest and seat
6 Wiring
Install base plate U to base plate H
Hot water supply pipe
Water supply pipe
Drain pipe
YUME ESPOIR template
Supplied template
Power cable (for installation)
* Only when installing from the water
supply pipe and drain pipe area
Installation
1 Marking the bolt (anchor) fixing position
Use supplied template to check and make preparations for the
dimensions and method for installation of the piping.
* If the power cable (for installation) is to be installed from the water
supply
pipe and drain pipe area, mark their position in the same way as below.
(1) Place the supplied template on the floor and set it to the position
of the water supply pipe, hot water supply pipe and drain pipe.
(2) Mark the fixing position of the basin and seat bolts (anchor).
(3) Drill out the fixing position holes for the basin bolts (anchor).
(4) Remove the template from the floor.