background image

YUME ESPOIR Installation Instructions

YUME ESPOIR

Basin body

[For Back wash] Type

Seat body

[Fixed Legrest] Type
[Movable Legrest] Type

Seat

[Fixed Legrest] Type
[Movable Legrest] Type

Base plate

(Image is of “Movable legrest” type)

(Image is of “Fixed legrest” type)

Contents

Before installation 

2

Usage conditions 

5

YUME ESPOIR packing 

6

Carrying the main body 

8

Installation of main body 

9

  1  Install the basin 

9

  2  Attach piping 

11

  3  Checks after installation of pipes  12

  4  Install the seat 

13

  5  Remove transportation bolt 

14

 6  Wiring 

15

  7  Attach base cover 

16

  8  Check operation (1) 

    (after assembling the seat) 

17

  9  Attach backrest and seat 

17

10  Check operation (2) 

 

(after attaching the backrest and seat) 18

After installation 

19

Attach neck cushion 

19

Attachment of the hair trap and the drain cap 19

Main body attachment diagram 

20

To the installer

• The instructions should be thoroughly read 

and understood before installation to ensure 
that YUME ESPOIR is installed correctly.

• After installation, give these instructions to 

the customer.

To the customers

• Customers must ask professional to install 

YUME ESPOIR.

• Customers must not install YUME ESPOIR 

by themselves.

• Customers must store these instructions in 

a safe place so as not to lose them.

* The actual shape of YUME ESPOIR and the 

images and dimensions listed in these 
instructions may be modified and are 
subject to change without notice.

Precaution

 The precautions listed here are to ensure that YUME ESPOIR can be installed safely, and to prevent any danger or risk to the person installing 

YUME ESPOIR or those around them. All of these precautions are important for safety. Takara Belmont is not responsible for any damage or risk 
to the person installing YUME ESPOIR or those around them due to accidents if YUME ESPOIR is installed without adhering to the precautions.

If YUME ESPOIR is installed after ignoring this symbol, 
"there is the risk of light or moderate injury or physical damage".

Note : Plumbing should be performed by a qualified technician and should meet all national and local plumbing codes and ordinances.
It is the responsibility of purchaser and/or plumber to conform to national and local codes and ordinances.
Takara Belmont does not take any responsibility or liability for plumbing and installation. 

1

Version 6

February 2020

Содержание YUME ESPOIR

























Отзывы: