(2) A uto Mode Control
G. Preset Control
Press P1 button a little longer (for around half second),
the seat will move to the preset shampoo postion automatically.
(If adjustment is needed, please refer A UTO MODE
POSIT ION A DJUST ME NT.)
H. A uto R eturn
Press P2 button a bit longer (for around half second) puts
the backrest upright position automatically.
Press A uto R eturn button for around half second, the seat will return
to the initial position.
* Initial position : seat - lowest point , backrest - upright position
I. E mergency Stop
During automatic procedure (Preset and A uto return), depress of any
side of the buttons on the foot control will cancel the automatic
movement immediately.
6-3 A uto Mode Position A djustment
Preset position adjustment
A . Set the seat and the backrest to the desired preset position by manual control.
B . T urn off main switch.
C. While depressing P1 button, turn on main switch.
D. K eep depressing P1 button until buzzer sounds, then release it.
-6-
6-4
. SA F E T Y L OC K DE V I C E
Chair down movements can be stopped automatically
by the safety lock device when pressure is detected
between the base and the safety lock cover.
If the safety device has been activated, simply operate
the base up button and remove the object causing the
safety device to activate from this area.
S afety lock cover
B ase
P reset S hampoo position
B ackrest return
Auto R eturn
