Installing/Detaching the Mist Cap
1
Practice using CALME, men's chair
Use the mist cap for CALME,
men's chair (EA-SMC-CA).
Installing the mist cap
Recline the backrest of CALME for an adequate
angle. (Swing Button)
Lift the head of the customer, and set the pillow
beneath the neck.
Lift the head of the customer, and overlap the
turban with the mist cap, and set it under the
head.
At this time, adjust the pillow position to allow
a gap of about 5 cm (thickness of two palms)
between the backrest and the back of the head.
While pulling the turban at both ends, attach it
to the forehead, and put the hook and loop
fasteners together on the forehead.
࣭:LWKRXWDOORZLQJDQDGHTXDWHJDSEHWZHHQWKHEDFNUHVWDQGWKHEDFNRIWKHKHDGWKHPLVW
will not reach throughout the head.
࣭(YHQZKHQWKHSUDFWLFHLVGRQHIURPWKHVWDWHZKHUHWKHPLVWFDSLVDOUHDG\LQVWDOOHGRQ
the head, the pillow should be set as shown above.
࣭(YHQZKHQDWRZHORUWKHOLNHLVXVHGLQVWHDGRIDSLOORZLWVKRXOGEHVHWVRWKDWDJDS
of about 5 cm is ensured as stated above.
Cap
Gap of about 5 cm
(thickness of two palms)
Pillow
Backrest
Pillow
Information
While lapping the rubber portion
of the mist cap with the turban,
put the hook and loop fastener
at the right and left ends
together on the forehead.
At this time, align the center part of the turban with
the rubber portion of the mist cap and overlap them.
7RSUHYHQWPLVWOHDNDJHEHVXUHWRRYHUODSWKHWXUEDQZLWKWKHPLVWFDSWLJKWO\
DQGVHFXUHWKHKRRNDQGORRSIDVWHQHUVZLWKRXWDOORZLQJDQ\JDSV
㸯
㸰
㸱
㸲
Information
Turban
Turban
23
Rubber portion
Mist cap
Hook and loop fasteners
