Installing/Detaching the Mist Cap
Apply the turban by using either method of A or B shown below.
First, mate the center of the mist cap
and the back center of the turban.
Open-fastener state
Mist cap
Cap joint N
Rubber portion
Method for fixing the hook and loop
fastener at the neckline.
Set the center of the turban on the forehead, and secure
the hook and loop fasteners so that the turban comes down
to the lowest neckline of the customer.
㸨,I\RXDUHFRQFHUQHGDERXWPLVWOHDNDJH0HWKRG%
is recommended.
8VHWKHPLVWFDSV($60&6:3&3&%3&6
for the styling chair and perm/color.
Be careful not to allow
the customer's hair to
be jammed into the
fasteners.
To prevent mist leakage, be sure
to pull and tighten the string.
ͤ,IWKHIOH[LEOHKRVHLVKDUGWR
insert, apply water to the inside
of the plug-in portion of the
flexible hose, which will make
your work easier.
Method for fixing the hook and loop
fasteners on the forehead
3RVLWLRQWKHFHQWHURIWKHWXUEDQDWWKHEDFN
center of the customer's neck, and secure the
tape onto the forehead.
1
3UDFWLFHXVLQJWKHVW\OLQJFKDLU
Installing the mist cap.
㸦8VHRIWKHRSWLRQDO)OH[LEOHKRVHKROGHULVUHFRPPHQGHG㸧
㸯
3XOODQGWLJKWHQWKHVWULQJ
and secure it with the stopper.
㸱
Tighten the fasteners at the
right and the left sides,
one at a time.
Insert the leading edge of the
flexible hose into the cap
joint N.
㸲
㸳
Open the fastener of the mist cap, overlap the rubber portion on the turban, and then mate the right and
the left hook and loop fasteners of the mist cap on the forehead.
㸰
Information
CAUTION
To prevent mist leakage, be sure to overlap the turban with the mist cap tightly, and
secure the hook and loop fasteners without allowing any gaps.
Information
Stopper
String
21
Fastener
Turban
Turban
