Takara Belmont Salon Console, Руководство по установке

Страница: 7 / 12

7
⑤ Secure the basin body to the wall with the wall fixing
brackets (2 points).
[M4×30 Wood screw....2]
Wall fixing
bracket
ⅱ )
Wood screw
Wood screw
Always test the drainage flow to prevent accident during operation.
* Test the drainage flow at the sametime of the water flow. (P9 3- ⑤ )
④ Connect the drain hose with installed drain pipe.
i ) Insert the drain hose with a bearing sleeve to the drain pipe.
ii) Press the bearing sleeve to the drain pipe and fit it into
the drain pipe so that the drain hose and the drain pipe
are connected tightly.
i ) Loosen the screws of the wall fixing brackets in the basin
body side first. Set and tighten the wood screws in the
wall.
ii) Adjust the position of the basin body so that stand
vertical on the floor. And then tighten the screws in
the basin body.
* When the diameter of the drain pipe is VU50, use an
adjuster.
*The joint of the bearing sleeve and the drain pipe must
be set or installed airtight in order to prevent water leakage.
Bearing sleeve
Adjuster
*Used for
VU50 pipe only
VU40
VU40,VU50
Drain hose
The joint must
be airtight
Drain hose
Bearing sleeve
Installed drain pipe
Caution