4
Attach the step.
BB-IVFW :
Raise the legrest.
Insert the nuts of the step (back side) to the holes for nut of mounting plate.
Adjust the adjuster on the back side of step.
BB-IVFW, IVFS, IVFT :
Insert the screw of the step (back side) to the holes of mounting plate.
Fix the step with three nuts (M6).
Adjust the adjuster on the back side of step.
Loosen
Shorten
Extend
Fasten
Legrest
Mounting Plate
Nu
t
Nut(M10)
Step Bracket
The adjuster is on the back side
Adjuster
Guide Knob
Hole for Nut
Step
Screw
After mounting the step, make sure that the mounting hardware is securely
engaged in the guide, the nuts are inserted to the holes, and there is no
wobble in the step. If there is any wobble, the step may not be stable when
your customers step up to or step down from the step. Also, when raising the
legrest, it may rub against the upper side of the step.
Make sure that the legrest is raised when mounting or detaching the step.
Care must be taken when carrying or placing the step since it is very heavy.
Falling accident may result in severe injury.
Care must be taken when extending the adjuster so that it will not touch the
power cord when the chair is rotated.
Warning
INOVA-EX
Installation Instruction
Caution
Loosen
Shorten
Extend
Fasten
Step Mounting Pltae
Nut (M6)
Nut (M10)
The adjuster is on the back side
Adjuster
Step
1E02NHA0
BOOK NO.
