Takara Belmont ESTHE PLACE, Руководство по эксплуатации

Страница: 3 / 24

●
Keep the chair operating range clear of
any obstacles.
●
Do not sit on the backrest.
●
Avoid any environment that is subject to
electromagnetic disturbance.
●
Installation precautions
●
Before and while changing preset or
auto-return positions
●
After changing preset or auto-return
positions
●
Sit only on the spot that is designed for
that purpose.
●
When reclining/raising the backrest
●
Do not apply an excess load on any parts of the chair.
Before and while operating the chair, make extra sure that its
operating range (seat moving up/down, backrest rising/reclining,
legrest rising/lowering, and chair rotation) and its proximity are
clear of human bodies or any other obstacles. Otherwise, the
chair may pinch body parts or objects, causing injury or property
damage.
The chair may tip over, causing injury or breakage.
Make extra sure that the chair’s operating range and its proximity
are clear of human bodies or any other obstacles. Otherwise, the
chair may pinch body parts or objects, causing injury or property
damage.
This product may not work properly in an environment that is
subject to electromagnetic disturbance. Do not install it near any
devices that generate electromagnetic waves, such as commu-
nication equipment or elevators.
Near this product, do not use mobile phones or any other
devices that generate electromagnetic waves.
●
Entrust the installation of this product to specialised personnel
●
●
The chair may tip over.
●
Before installing the chair, be sure to attach rubber plates to
the underside of the base to prevent the chair from wobbling.
Make extra sure that the chair’s operating range and its proximity
are clear of human bodies or any other obstacles.
Otherwise, the chair may pinch body parts or objects, causing
injury or property damage.
When the backrest is fully reclined, never sit on the headrest, the
height-adjustable service tables, or the edge of the seat. Do not
apply an unnecessarily heavy load. The chair may tip over or
break.
Make sure that the gap between the backrest and the seat is
reclining/raising the backrest. Otherwise, injury may occur due to
pinching.
Never climb onto the legrest or the backrest. Do not apply an unnecessarily heavy load on them. The chair may tip over or break. The
●
Precations for the build-in sockets
• Be sure to fully insert the power plug of the device being used into the built-in socket until reaching the base of the plug. Failure to
fully insert the plug or similar loose connection can result in a short circuit or heat generation that causes a fire.
• If the connection becomes loose, immediately stop using the equipment attached to the built-in socket and unplug the equipment
from the built-in socket.
Contact your nearest dealer or Takara Belmont as soon as possible for inspection or replacement parts.
• Remove the power plug of a device from the built-in socket when not using it.
• If any water gets on a built-in socket, immediately turn off the chair power switch, remove the plug, and wipe away the water.
Additionally, if a substantial amount of water gets inside a built-in socket, immediately remove the plug and contact your nearest
dealer or Takara Belmont.
• Do not touch a built-in socket with a wet hand.
• If needed, use a suitable conversion adapter as 12A (AC110V) or 7A (AC220/230V) or higher.
• When a conversion adapter is used, make sure that it is firmly plugged into the built-in socket.
Loose connection can make the adapter heated up and lead to fire.
legrest and the backrest have a load capacity of 60 kg.
Do not apply an unnecessarily heavy load on the headrest or the height-adjustable service tables. They have a load capacity of 10 kg.
WARNING
3