![Takara Belmont DIVAN-Z AB-DVZF Скачать руководство пользователя страница 32](http://html1.mh-extra.com/html/takara-belmont/divan-z-ab-dvzf/divan-z-ab-dvzf_operation-manual_3363550032.webp)
You can remove the footrest anytime it might interfere such as when sitting a wheelchair customer in the
chair or using a foot spa machine.
• After installing the footrest, make sure that the footrest bracket is firmly hooked to
the footrest mount and that the footrest is kept level. Failure to do so may result in
injury.
• Be careful when lifting and carrying the footrest, and of where you place it because
the footrest is heavy. Dropping the footrest could result in injury or damage the floor.
When adjusting the height of the adjuster, make sure that the adjuster does not rub on
the floor or catch the power cord when the chair is rotated. On the contrary, adjust the
height so that the product does not fall over even if the customer gets on the footrest at
exit/entry position.
Attaching/detaching the footrest
Adjusting the adjuster height
Footrest
The adjuster, which prevents the chair from tipping over, is located on the underside of the footrest.
Adjusting the adjuster height
①
Loosen the adjuster nut with wrench (opposite side
17mm) by turning it counterclockwise.
②
Adjust the height by rotating the adjuster.
counterclockwise
➡
highten clockwise
➡
shorten
③
Fasten the adjuster nut with wrench (opposite side
17mm) by turning it clockwise.
Detaching the footrest
Pull up the footrest at an angle with both hands and pull it up towards you to remove it.
Attaching the footrest
①
Insert the footrest bracket into the hole of the footrest mount.
②
Slide the footrest bracket to the back until it hits the stoppers.
③
Lower the footrest.
④
Make sure the footrest is level.
①
③
Footrest mount
Footrest bracket
Adjuster nut
Shorten
Highten
Adjuster
②
Positioning stoppers
Removing the Footrest
CAUTION
WARNING
32
Содержание DIVAN-Z AB-DVZF
Страница 38: ...NOTE...
Страница 39: ...NOTE...