manualshive.com logo in svg

Takara Belmont DIVAN-Z AB-DVZF, Руководство по эксплуатации

Поделиться
Скачать
Takara Belmont DIVAN-Z AB-DVZF Скачать руководство пользователя страница 24

What is Fit Mode...

This product is equipped with a shockless device, which will cause slight variance in the stop position. Use 

this setting when you want to adjust the height to the bowl properly, such as when back shampooing.

1. Turn off the power switch, and - while pressing the preset switch*1 you want to set and 

    the lowering switch (downward switch of the up/down switch) at the same time - turn on 

    the power switch.

2. Press and hold the preset switch and the lowering switch (downward switch of the 

    up/down switch) until a short beep sound is heard (for about 3 seconds).

    

The above action sets the Fit mode.

By repeating Steps 1 and 2, you can alternate ON/OFF *1 (when the fit mode is canceled, another beep 

sound is heard).

*1:This function can be set for each of preset switches 1 to 3.

*2:This function is set to "OFF" at the time of shipment from the factory.

Setting the fit mode

When the Fit Mode is set, a slight shock will occur due to the different control of the chair to properly align 

the stop position.

Moving the Chair to Preset Positions

24

Содержание DIVAN-Z AB-DVZF









































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды