Takara Belmont AY-ELI, Руководство по эксплуатации

Страница: 18 / 28

Running Water
Air Bubble Unit
The air bubble unit should be rinsed with running water
in the direction shown in the illustration below:
<The case of Spa-showerhead>
Rotate and detach the sprinkling filter unit and remove the
three parts (sprinkling filter unit, air bubble unit, and rubber
gasket).
Do not detach the O-ring.)
Clean the sprinkling filter unit (with water).
Remove dirt, such as water deposits in the shower holes
on the sprinkling filter unit, with a toothbrush.
Clean the air bubble unit (with water).
Clean the unit once a month (as a general guide).
Remove dirt, such as water deposits on the air bubble
unit, with a toothbrush.
Sprinkling Filter unit
Air Bubble Unit
Rubber Gasket
O-ring
Showerhead Main Unit
Surface to be Cleaned
(front and back)
Re-assemble the showerhead.
<Assembling Procedures>
(1) Insert the air bubble unit and the rubber gasket in
the sprinkling filter unit in this order.
(2) Mount the sprinkling filter unit on the showerhead
main unit, while the water discharge side of the
sprinkling filter unit facing down.
Water Discharge Side
[ Spa-showerhead is an optional part]
<The case of Yume-showerhead>
[ Yume-showerhead is an optional part]
Body
Surface to be Cleaned
Shower Filter unit
Clean the shower filter unit (with water).
Remove dirt, such as water deposits in the shower holes
on the shower filter unit, with a toothbrush.