background image

SAFETY PRECAUTIONS (MUST BE OBEYED)

Precautions for using Dryer/Iron  Holder

6

CAUTION

• Be care

f

ul that the 

d

ryer or iron does not contact the legs or other body parts of the   

  customer when using the dryer/iron holder.

• Always be sure to store the holder under the body after use so it does not interfere with 

  work.

• Do not rotate the dryer/iron holder with a hand dryer or iron still inserted in the slot. 

  Doing so can damage the chair, and the heat can cause deformation or other damage.

• 

T

he 

d

ryer/iron holder can withstand a load of up to 50 N (5 kg

f

).

Precautions for cleaning procedures

Do not use any of the following substances to clean the chair.

Thinner, alcohol, nail polish remover, volatile chemicals (such as gasoline or kerosene), 

acid or alkaline solutions, chlorinated cleaners, disinfectants that are highly corrosive to

metal, povidone iodine (iodine solution), sodium hypochlorite, waxes containing abrasive

compounds, sponges containing abrasive compounds and similar substances.

Do not use brushes, scouring brushes or similar items when cleaning the chair. Using them

will damage the chair or result in the inability to clean o

f

f the dirt or grime.

Precautions for using headrest

Be care

f

ul when operating the headrest that 

f

ingers and other body parts are not pinched

between the area around the headrest storage lever (or headrest operation button) or in

between the backrest.

Do not pull up the headrest more than necessary.

Be careful because doing so will make the headrest to completely come o

f

f the chair.

Precautions for adjusting the adjuster

When adjusting the adjuster, be careful that the adjuster does not rub the 

f

loor or catch on 

the power cord in rotating the chair.

Adjust the adjuster so that the chair does not tip over when stepping on the step.

Precautions when using the cape holder

• Do not apply excessive force to the cape holder as it can only withstand a load of 10 N

 (1 kgf/2.2 lb

f

).

• Be sure to always return it to the stored state when not in use.

• When storing the cape holder, be careful not to pinch the customer's or user's 

f

ingers 

between it and the armrest.

• When using and storing the cape holder, please rotate the cape holder with hand.

Observe the following precautions when tilting the seat

• Do not raise the seat with the backrest reclined.

• Make sure the chair is properly adjusted for children before letting a child sit on it.

Unplug the power plug during installation of the chair and parts replacement.

Unplug the power plug during installation of the chair and parts replacement. Failure to do 

so can result in an accident or injury.

Содержание AB-LGF









































Отзывы: