Takara Belmont AB-LGF, Руководство по эксплуатации

Страница: 31 / 40

* If hairstyling product has hardened:
■
Spray-type Hairstyling Products (Especially hard types)
WARNING
CARE AND MAINTENANCE
30
When using spray-type hairstyling products (especially hard types), check the entire chair
to make sure that none of the product is adhering to the exterior surface of the chair
(including leather parts). Immediately wipe off any hairstyling product that is adhering to
the chair.
Failure to wipe off the product and allowing it to remain result in the hairstyling product
hardening, leaving a feeling of roughness. Be especially careful of flat surfaces (such as
the plastic covers) as this roughness is considerably noticeable on flat surfaces.
Clean off adhered and hardened hair product by using ethanol.
However, repeatedly cleaning off product adhering to plastic covers and leather parts by
using ethanol can cause the surface to deteriorate, the luster to be lost, and cracking.
Immediately wiping off any adhering hairstyling product is the best method to prevent any
problems of this type.
Perform inspection according to the "Daily Inspection Procedures" indicated on pages 33 to
35 of this operation manual in order to ensure safe use of this chair.
DAILY INSPECTION
Perform daily inspection according to the "Daily Inspection Procedures".
Using the chair without performing daily inspection can result in
malfunction or accident.