These are not malfunctions
■
Backrest reclining prevented
■
Preset/auto-return functions
disabled
Perform the following inspection procedures in order to ensure that the chair can be used safely.
• Daily Inspection Procedures
□
Turn on the power switch, and
check that a double beep with
one to two pauses are not
emitted intermittently.
□
Check that the chair moves
normally to the preset positions
by using the preset switches.
□
Check that the chair moves
normally to the initial position
(position for getting in or out of
the chair) by using the auto-
return switch.
□
Check that the chair raises and
lowers by using the UP/DOWN
switches and foot switches of
the chair.
□
Check that the chair
operates normally.
□
Turn off the power switch, and wait
approximately five seconds before turning
on the power switch again. If the alarm
still sounds, the position detector might
be faulty. Stop using the chair, turn off the
power, unplug the power plug, and
contact your closest dealer or Takara
Belmont.
□
Perform the procedures indicated in "1
Using the Preset Function" under "How to
Use" (p. 19). If operation is still not normal,
it might not be possible to safely use the
chair. Stop using the chair, turn off the
power, unplug the power plug, and
contact your closest dealer or Takara
Belmont.
□
Perform the procedures indicated in "2
Using the Auto-return Function" under
"How to Use" (p. 20). If operation is still
not normal, it might not be possible to
safely use the chair. Stop using the chair,
turn off the power, unplug the power plug,
and contact your closest dealer or Takara
Belmont.
□
Perform the procedures indicated in "(2)
Raising/Lowering the Chair" under "How
to Use" (p. 14). If operation is still not
normal, it might not be possible to safely
use the chair. Stop using the chair, turn off
the power, unplug the power plug, and
contact your closest dealer or Takara
Belmont.
Daily Inspection Procedures
23
If any of the problems described above are inspected and the chair does not work normally even after performing
the recovery procedures, immediately stop using the chair, turn off the power, unplug the power plug, and contact
your closest dealer or Takara Belmont.
Before Requesting Repair
■
When the child seat is raised, the backrest is only able to recline a
small amount (approx. 10°) to prevent accidents such as falling over
or dropping. Before reclining the backrest, please lower the child
seat to its lowest position.
■
When the child seat is raised, the preset and auto-return functions
are disabled to prevent accidents such as falling over or dropping.
Before using the preset and auto-return functions, please lower the
child seat to its lowest position.
Inspection Item
Inspection Procedures
Recovery Procedures if there is a Problem
