2. Lowering the child seat
Press the child seat Down switch on the armrest control panel. While it is pressed, the child seat will lower and
a warning beeper will sound.
⇒
If the chair rotation lock is released, the chair rotation gets locked automatically when you press the switch.
⇒
If the chair rotation lock is released, the chair rotation gets locked automatically when you press the switch.
The child seat is not able to be raised while the backrest is reclined by a large amount (approx 10° or more) to
prevent falling over or dropping accidents. Please return the backrest to the fully upright position before raising
the child seat.
CAUTION
How to Use
17
This chair is equipped with a child seat that is able to be individually raised and lowered.
1. Raising the child seat
Press the child seat Up switch on the armrest control panel. The child seat will rise up while it is
being pressed.
(4) Using the Child Seat Function
Child seat Up switch
Child seat Down switch
Child seat
Child seat
•
D
o not raise or lower the child seat while a child is seated. Only allow a child to sit down
after setting the chair to an appropriate position. If the child seat is raised or lowered
while a child is seated, it may result in injury due to the child falling down or pinching
body parts in the child seat gap.
•
B
efore raising or lowering the child seat, always confirm that the child has not placed
any body part below the seat, or in the gap between the seat and the armrest.
•
T
he child seat has been designed to withstand a maximum load of 500 N (50 kgf/110 lbf).
P
lease pay particular attention to avoid operating the child seat while objects or body
parts such as fingers are present in the locations indicated by the dotted lines in the
diagram below.
CAUTION
How to Use
18
＜
Emergency Rise Function
＞
If an object or a body part such as a hand or leg is pinched between the child seat and the seat (shaded section of
the following diagram) during child seat lowering, this function slightly raises the child seat and halts operation.
When the system detects that an object or a body part has become pinched in the shaded area in the diagram,
the child seat down switch is disabled. The child seat can only be lowered after raising it up and removing the object
that is pinched in between.
•
G
ap between the child seat, backrest, armrest, and seat.
•
T
he rear of the child seat.
Child seat
Seat
