Takagi T-H1, Инструкция по установке и руководство пользователя

Страница: 4 / 31

- 4 -
5. If any problem should occur, turn off all hot
water taps and turn off the gas. Then call a
trained technician or the Gas Company or
the manufacturer.
6.
WARNING: Do not disconnect the
electrical supply if the ambient temperature
will drop below freezing. The Freeze
Prevention Device only works if the unit
has electrical power. The Freeze
Prevention Device is rated for temperatures
down to 0ºF (-18ºC) in a wind free
environment. Refer to the section on
Winterizing and the Freeze Prevention
Device for more information. The Warranty
will not be covered if the heat exchanger is
damaged due to freezing.
7. WARNING: Water temperatures over
125ºF can cause severe burns instantly or
death from scalding. The water
temperature is set at 122ºF (50ºC) from the
factory to minimize any scalding risk.
Before bathing or showering always check
the water temperature.
8. WARNING: Do not use this appliance if
any part has been in contact with or been
immersed water. Immediately call a trained
technician to inspect and/or service the unit
if necessary.
9. WARNING: Do not store or use gasoline or
other flammables, vapors or liquids in the
vicinity of this appliance.
10. WARNING: Do not reverse the water
and/or gas connections as this will damage
the gas valves and can cause severe injury
or death. Following the diagram below
when installing your appliance:
11. WARNING: When the T-H1 is operating,
the surface of the front cover can become
very hot. Please do not touch
T-H1 COMPONENTS
RATING PLATE
HOT
GAS
COLD