22
Installation
OM8-T38
Tighten the
locking screw
OM8-T39
Loosen
2.Tighten the locking screw with 1.5 mm
hexagonal wrench, secure the light guide in
place.
Remove four screws
OM8-T40
● Attaching the Cables
・Removing the counter-balanced arm's cover
1.Turn the vertical movement lock handle
counterclockwise, remove the handle.
2.Remove the four screws on the arm's cover with
a screwdriver.
3.Remove the arm's cover, and attach the vertical
movement locking handle again to the arm,
then turn it clockwise until it stops, securing the
balance arm in place.
OM8-T41
1. Remove the arm's cover
2. Attach the handle
