TAJIMA TLMX Series, Руководство пользователя, Страница: 271 / 318

Functions concerning optional device
256
Chapter 9
RR05
3-3. To change color by using DST design in sequin III (Needle bar selection)
This setting enables color change on sequin device III (corresponding
to Sequin_O and Sequin_O_2) by using DST design (corresponding
only to sequin code Sequin_O) that is originally used for single color.
After inputting data of DST design, sequin code (Sequin_O) will be
allocated to "1" in the right figure. It is possible to switch "1" and "2" in
step unit by this function.
3-3-1.
Explanation on the screen
[a] Setting example of color change
When storing data after change to a USB memory, display of "Needle Selection" on the
operation panel will be switched as shown below figure. At the same time, data of the design
(the memory of the machine) will be also edited automatically, and sequin code in the design
will switch from "Sequin_O" to "Sequin_O_2".
Sequin_O
Sequin_O_2
1 2 1 2
Left side Right side
2 Needle Bar Selection
1
2
3
4
5
6 5
B
1
8
1
[a] Setting for color change of device
Left side
In case of sewing by "1"
Left side
In case of sewing by "2"
4
12
Select the last
needle
4
12
Select the last
needle
Right side
In case of sewing by "1"
Right side
In case of sewing by "2"
4
1
Select the first
needle
4
1
Select the first
needle
Left side Right side
1 2 1 2
4
12
4
12